Description
Remote electromagnetic flowmeter for water and wastewater applications.
Unaffected by pressure and temperature, the Promag 400 electromagnetic flowmeter range offers accurate bidirectional measurement of liquids with a
minimum conductivity of ≥5µS/cm in water and wastewater applications.
| Technical Data | Proal mag D | Promag L |
| Liner | Polyamide | Hard rubber, polyurethane or PTFE |
| Nominal diameter | DN25…100 | DN50…2400 |
| Conductivity | ≥5µS/cm for liquids, ≥20µS/cm for demineralised water | ≥5µS/cm for liquids, ≥20µS/cm for demineralised water |
| Housing | Polycarbonate | Polycarbonate |
| Process connection | Wafer | Flange (lap joint) |
| Process temperature | 0°C…+60°C | 0°C…+80°C for hard rubber (DN350…2400),
-20°C…+50°C for polyurethane (DN50…1200), -20°C…+90°C for PTFE (DN50…300) |
| Pressure | Up to 16 bar | Up to 16 bar |
| Communication | 4…20mA HART, PROFIBUS DP, Ethernet/IP, MODBUS RS485 | 4…20mA HART, PROFIBUS DP, Ethernet/IP, MODBUS RS485 |
| Certification | KTW, WRAS, NSF, ACS | KTW, WRAS, NSF, ACS |
| Protection | IP66/67, type 4X enclosure | IP66/67, type 4X enclosure |
| Technical Data | Promag W |
| Liner | Hard rubber or polyurethane |
| Nominal diameter | DN50…2000 (rubber liner), DN25…1200 (polyurethane liner) |
| Conductivity | ≥5µS/cm for liquids, ≥20µS/cm for demineralised water |
| Housing | Polycarbonate |
| Process connection | Flange |
| Process temperature | 0°C…+80°C for hard rubber (DN50…2000),
-20°C…+50°C for polyurethane (DN25…1200) |
| Pressure | Up to 40 bar |
| Communication | 4…20mA HART, PROFIBUS DP, Ethernet/IP, MODBUS RS485 |
| Certification | KTW, WRAS, NSF, ACS |
| Protection | IP66/67, type 4X enclosure (IP68, type 6P enclosure as an option) |
Promag D: compact wafer device
- Space-saving compact design for use where space is at a minimum.
- Short installation length and lightweight.
- Customised and fast centring due to innovative housing construction.
Promag L: standard device
- Lap-joint flange concept (DN≤300) for flexible installation, independent of the orientation of the pipe flange pitch diameter.
- Lightweight with short installation lengths in accordance with ISO and DVGW norms.
- Compact design without limiting accuracy, repeatability etc.
Promag W: specialist device
- Approved for water custody transfer according to MI-001 and OIML R49.
- With certified corrosion protection and IP68 (type 6P enclosure) protection type for continuous underwater use, for corrosive environment (fulfils C5-M according to EN ISO 12944) and for direct underground installation (fulfils Im3 according to EN ISO 12944).
For more information, specific application advice or to order,
Please Contact us on +91 8367005552 or +91 9063008734
email: info@sigmaautomation.co.in or instsales@sigmaautomation.co.in
Please Contact us on +91 8367005552 or +91 9063008734For more information, specific application advice or to order,
Technical Information
Promag L-400
Promag D-400
Promag W-400
